Nostalgia Electrics Helman Group CCP-509 Popcorn Maker "motor" Questions

...machine 8oz stirring rod please? My 8oz popcorn machine stopped working, i was told the 60ktyz motor is burnt, so i was told to change the motor but the stirring rod was stock into the motor . i ...

Tired Motor We have had a Paragon 1911-6 Popcorn Maker at our bar for over three years. We use it constantly, and it is very well maintained. Lately, the motor does not start when it is switched on, ...

...stopped working....is this a big problem or can we fix it? Hey, The stirring rod is operated by a motor on the bottom of the popcorn maker, if the rod is not moving, it means the motor is not ...

Its a 120v 670w motor for the ccp-510 I need the Its a 120v 670w motor that turns the kittle drive I need a replacement motor Call them at this number and see if they can provide you with a source for

Stirrer is not turning. Kernels burning Stirrer is not turning. Kernels burning. Not sure if motor needs to be replaced. check first the fuse of the motor. if not busted, measure the resistance of the

...can spin the agitator in the pan with one hand easy then it is not stuck. check to make sure the motor switch is supplying voltage to the motor. If that is ok now that you have the front panel off ...

stripped gear in motor stripped nylon gear in motor of Old Fashioned movie time popcorn cart model # CCP-509 motor # XB6020 120V-60H2 Do I have to replace the entire motor??? I just spoke with ...

kettle motor is out need a replacement motor The motor for a Gold Rush 6oz popper is #2429-A. It is available from any Cretors Distributor with a service dept. I don't think you can buy Cretors parts ...

The synchronous motor that operates the stirrer on my 8oz popcorn machine isn't working and I can't find a replacement anywhere. The motor is AC220v 50/60Hz 4w 8RPM and is Chinese. Can anyone help ...

I need a replacement motor for my popcorn machine. Motor # 3724up-180. Where might i find one? Hi and welcome to FixYa, I am Kelly Not sure where you got your part number from as it appears to cross ...