Adidas Candy Digital watch "t2 t1" Questions

...T1 and T2.
• IMPORTANT: When your displayed time is T2, you CAN NOT set the time but just set the offset of T2 relative to T1.
• You can see which time is displayed by looking for a very ...

...T1" or "T2" directly above the seconds. So first make sure you are in "T1" by holding the ST/SP button first, then holding the SET button second and simultaneously. After holding both for a couple ...

...CL-5009. Display is on T2, want T1 Can't seem to get display back to T1 so I can set the watch normally. It seems to be staying on T2 setting. Try holding the st/st button while on time ...

...T1 time with the T2 time. Holding down this same button for several seconds will toggle the current time mode to T2 and the watch will continue to function in the second time zone until you toggle it ...

...If it's in T2, change to T1 by holding C button. To change time, hold B button until the watch is flashing. Press A button to go through different settings. Use C and D button to change

...t1 or t2. Press MODE to switch the digit place finally press SET and then MODE Note: Check for bell and sound symbols,if they are not there Press MODE then then SET again press SET Press ALARM for ...

my alarm wont go off mcdevito75 here, Press MODE for each function till you reach Alarm, set time for alarm then put alarm on, if you have t1 and t2 times you"ll have to do this twice.

T1. T2 (for another time zone) is up or down in the offset. Good luck! btw - A, B buttons are from top to bottom on left and C, D are top to bottom right Ok so all you need to do is make sure youre on

...T1 and T2, click and hold the upper right button (C). -When you finally are on T1, click and hold the upper left button (A) and you are set to go! -Click the lower left button (B) to scroll through ...

...questions might help. Example: http://www.fixya.com/support/t1777612-set_columbia_cl_5009_display_t2_want Can set columbia CL 5009 Display is on T2 want ...