Bunn NHB Coffee Maker "switch water warmer" Questions

...switch ON. 5) Pour decanter of fresh water through pour-in opening at top of brewer. 6) Hot water will be delivered through the sprayhead. This distributes the hot water evenly over the coffee bed ...

switch lights do not come on and warmers do not work . the ready to brew light is also out , no power no hot water , nothing heats up. CHECK THE BLACK WIRE COMING OFF THE BOTTOM TERMINAL OF THERMOSTAT

...water was hot. When I make the coffee, the warmer button will not come on and the coffee is cold. I turned on the vacation button for 15 minutes and it was hot again and the warmer button ...

...switch. make sure the tank is full. it'll take 2 1/2 brews to fill the tank. keep brewing until the water comes out. and yes, clean out the sprayhead holes and the drain in the fill tray in the

Water coming out of sprayhead should be hot, either the main switch in back is off for the element, or the hi-limit switch is damaged or if there is an in-line fuse on the element it might be damaged

...It appeared that the light in the switch blew although the warmer plate still warmed normally. Shortly after the water in the tank started boiling the warmer switch light started operating

...water and warmer light does not turn on i have tried multiple times to fill the resivor but still nothing. i have followed the instructions to the letter and to no avail i still cannot get coffee!!! ...

...switch on a Bunn Omatic 3 station coffee maker (with a hot water spout on the side) Unplug your brewer, take the 2 screws off of the lid, lift the lid, and you can see your switches from there. ...

water in the tank started boiling the warmer switch light started operating again. You probably don't use the coffee maker every day, and you may be using it once a week or less. It sounds like you've

...water comes out cold Test that you have it plugged into an operating outlet.... Check that all of the switches are "on" (the warmer and the heater switches). If this doesn't help, you'll need to ...