Fossil JR9388 Watch "set zero" Questions

...it has reset to zero. how do I set it to current date and time? Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all FOSSIL watch manuals.Rate me,

...zero. To set the second needle to zero keep pressing the bottom button untill it reaches zero or where you like it to re-set each time. Depend on you. 3. Once all neddles of stopwatch are at resting ...

...zero. The secret is that zeroing the MINUTE hand also controls the UTC display zeroing. You will have to crank it until the UTC display reads 0:00 (24:00). Then go back and set the time and so on as ...

set to zero. If the hour hand of the chronograph is off, you would then do the same using the bottom pusher to set it to zero as well. At this point you simply push the crown back in, and it should be

...set the big seconds hand to zero) and release it when done 4) when big seconds hand is zeroed push the crown back in 5) pull the crown out again and set desired time 6) push the crown back in. If all ...

...zero, it goes to 58 minutes on the dial when I push the button. pull the crown full out reset all hands set time set alarm or second time if you wish and press the crown back. Found instructions on ...

skagen manual 747lsxn cronocraf zero setting is not going to 12 Stop the chrono with top button (if it is running) reset with bottom button. If hand does not zero pull out winder to position 2 and use

...on Luminox 8101 dive watch ( functions of dials & setting back to zero). pull the crown out and use the top and bottom buttons to zero out. when pull the crown out each position set a differnt ...

...zero, set the crown to either click position one (usually date setting) or two (usually time setting), and use each button to test which subdial hand it will zero out. Usually it is the first crown ...

ZERO OUT THE CHRONOGRAPH Got the second hand and split second hand zeroed but the minute indicator nrrds to be zeroed out and I am not getting it. Here is the manual to help set this ...