Missing Probable Cause 1. Intermittent or open connection of the speed sensor (reed switch) wiring. 2. Reed switch is defective or has intermittent connection. 3. Drive motor brushes are bad. 4. Lower
Missing Probable Cause 1. Intermittent or open connection of the speed sensor (reed switch) wiring. 2. Reed switch is defective or has intermittent connection. 3. Drive motor brushes are bad. 4. Lower
Question about Proform Exercise & Fitness
...the drive belt back onto the motor. It is super tight and I don't see any tension bolts anywhere. Am I missing something? Is there a trick to this? put the belt on before you bolt the motor ...
Missing Probable Cause 1. Intermittent or open connection of the speed sensor (reed switch) wiring. 2. Reed switch is defective or has intermittent connection. 3. Drive motor brushes are bad. 4. Lower
Question about Nordic Track Exercise & Fitness
I have a NordicTrack C2050. The belt abruptly stopped moving. I can hear the motor running but nothing is moving. I have had this machine for several years with no problems. Your thoughts are grea tly
Question about Precor Exercise & Fitness
Missing Probable Cause 1. Intermittent or open connection of the speed sensor (reed switch) wiring. 2. Reed switch is defective or has intermittent connection. 3. Drive motor brushes are bad. 4. Lower
Question about Sportsart Exercise & Fitness
...missing or bent, replace the optic sensor wheel. 􀁺 Optic sensor wires ? Check wire connections from the optic sensor to the drive board. Check wire continuity . 􀁺 Optic ...
...from display board to main motor board or lower board.4) See if you display board has +5VDC, is missing you have problem with the power supply.5) Try to run your software calibration Inmediately ...
Question about Nordic Track Exercise & Fitness
drive the lift down. There can be a few causes... 1) "Up" lift button stuck 2) console electronics gone haywire(unusual) 3) lift assembly feedback lost, missing, incorrect(bad lift) 4) failing control
...drive motor the easiest way to eliminate the problem is replacing the sensor itself, unless it is missing the 5v DC from the motor control or power board ( usually their is LED light that is on and ...
1 questions posted
Usually answered in minutes!
346 Questions
56 Questions
48 Questions
44 Questions