Epic A30T Treadmill "stop button incline" Questions

...stop button once and then press the +incline button and treadmill should calibrate the incline. If that does not you need a new incline motor. shoot me a email at [email protected] and I ...

...stop button and release then press the incline up button. the incline motor should go all the way up then all the way down with - - on the console. If the unit only moves just a and inch or so or the ...

...incline up button, then pull the safety key off. Release the incline up button and replace the safety key. The treadmill should go to maximum incline then minimum. after calibration is completed, ...

...stop button and the speed up or spped plus button. keep holding them down as you insert the safety key, then let go of both. Press the stop button 1 time, you should see all 0's in the windows, or EP ...

...button, remove the safety key. Replace the safety key and the treadmill should calibrate. If that doesn't work, press the stop and speed up buttons and hold, then place the safety key in place. This ...

stop button one time only. now press the incline up button (incline motor should start moving up) incline will go up to the top and then all the way to the bottom. when it gets done you can remove the

...incline stops machine (incline on screen inclines), stop button doesn't do anything, hold down speed and will speed up but take pressure off and slows back to 1.0 Treadmill console needs to be ...

...stop key one time and the display should show some other numbers and some 00's. Press the Incline Up button and see if the Incline begins to move, if it does let it go all the way up and then all the ...

STOP button one time. Congratulations, you are now in Calibration Mode. Now that we are in calibration, press the INCLINE UP button one time. This will cause the platform to go all the way up and then

...the stop button once more then press the plus incline button. the incline should calibrate itself. If not then you might need a motor control board.. I have some in stock, shoot me a message if ...