...belt on my Riccar supralite vacuum and need instructions Lay the vacuum upside down, remove the bottom plate, remove the brush roll and belt, install new belt around motor shaft and brush roll, pull ...
...supralite sounding rough it runs good but sounds rough. i cleaned the brush and checked the belt. that all good. it could be the bearings at end of brushbar,take belt and brushbar off and see if it's ...
...I also replace the fan housing and the belt at the same time? RICCAR SIMPLICITY SUPRALITE RSL MOTOR and FAN Its looks the same as a Kirby its done with a nut on the axle on the armature of the
...SupraLite Upright Vac used to glide across the floor so easily, but now we have to push it pretty hard. This just recently started. What can be wrong? Suggest you check the wheels to see if they are ...
125 questions posted
Usually answered in minutes!
4 Questions
