...brush roll is not spinning. The belt may be stretched and need replaced. The brush roll may be installed improperly. The magnet in the brush roll has to be aligned with the indicator light for the ...
...brush roll has stopped turning, usually because an object has become stuck in the brush roll. When that happens you should turn the machine off (unplug it also for safety), remove the obstruction and ...
...brush roll for string (from the carpet) or other debris in and or around the bearings on the ends of the brush roll. Or check your brush height. If you have the brush too low/close to the floor it ...
...brush roll is jammed and that there may also be a blockage somewhere. You should take the brush roll out and make sure it is clear of obstruction, and also check for blockages (in the inspection flap ...
...apex zero m flashing The indicator light flashing purportedly usually means the battery is low or the vacuum is being charged. ...
...brush roll is spinning. If there is no green light: 1 - belt may be broken 2 - Improperly installed nozzle 3 - wrong brush roll is installed Properly adjust the nozzle - turn the Kirby on. Keep ...
Question about Euro-Pro Vacuums
brush starts to roll for about 3 seconds and than brush freezes and light turns red try turning the roller by hand UNPLUG VACUUM FIRSTit should turn very easy, otherwise it is bindingall uprights have
Question about Kirby Vacuums
When vacuuming with the Kirby ultimate G upright is the green light suppose to be on? The light indicates your brush roll is spinning.
...brush roll is not rotating freely. The automatic height adjustment works by sensing the drag on the brush roll, and altering the height to maintain constant drag. So, if the brush roll is sticking, ...
...brush roll replacement and the bag light indicates a need to empty the bag or look for a clog somewhere in the air flow area of the hose or wand. These machines are designed to shut down if you keep ...
125 questions posted
Usually answered in minutes!
4 Questions
