...10. Replace the plate over roller, making sure the front tabs line up with the slots on the base. 11. Flip down to secure hooks. 12. Press down on plate to secure it. 13. Replace screws. 14. Turn ...
...10 minutes of use I have had problems with the belts on my Mach 5 overheating (smell of burning rubber) and also with the motor overheating and shutting down. I learned the hard way that one of the ...
...screws on plastic cover. I purchased my belt at target for 2.54. Part number anywhere is Eureka U. Remove the roller brush. Loop belt around drive motor first and then around roller brush inserting ...
Question about Riccar Vacuums
...screws on the metal bottom plate with your Phillips head screw driver, and remove the bottom plate from the vacuum cleaner so the belt is completely exposed with the roller brush. Step 3: Remove the ...
...screws, you will be able remove the cover and access your brush roller. While you're repairing your Shark NV22, why not replace your hose and/or filters? For optimal performance, it is recommended ...
...screws that need to be removed to get access to the belt and the clutch assembly. The roller brush clips in onto the floor base with one clip on each side, you can gently but easily unclip it. Remove ...
...screws on opposing sides of the bottom of your vacuum. Remove the brush roll and examine the belt to see if it is applying tension to the brush roll. If the belt is loose this would cause the brush ...
Question about Shark Vacuums
...screws or you could crack the plastic casing. You can then reconnect the shark vacuum to the power supply and check that everything is working properly. We have based this guide on the manufacturer's ...
125 questions posted
Usually answered in minutes!
4 Questions