Crown CE1000 2-Channel Amplifier "dead" Questions

poineer deck amplifier dc-z74 relays click but set deck does not come on no display lights dead unit only red led and relay sound but the deck does not come on its a dead unit nor poineer deck ...

...fuses all ok, over rid the internal power-on rely and power amp powers up but pre amp circuit still dead, any idea, power panel look fine but appears to be dead, no sign of burning etc! no lights on ...

one side dead right chanel fully dead , output transistor burnedout hi zm_16dec, Right chanel fully dead , output transistor burnedout , Without knowing the make and model of your amplifier all i can ...

Adcom GFA-7400 power amp; 1 dead channel (thermal protect LED on) I have an Adcom GFA-7400 multichannel power amplifier, but one channel is not working... How do I fix one channel dead (with thermal ...

ka5010 amplifier dead unit dead. 2.5A 250V fuse blown inside unit.R88 and R62 fried. R88 is situated next to Q24.can you help jamycor possibly transistor Q24 may be faulty,replace Q24 plus the ...

My Casio WK-3000 works perfectly except I have a dead octave (8 notes) on the keyboard. I've initialized the system but the 8 notes remain dead. You will have to have someone open up the keyboard and ...

sa gx500 technics cooling fan dead pull out the fan inside before you buy a new one check first the voltage line of fan usually it reads 6vdc to 12vdc after you verify there was a exising voltage ...

One channel dead - Aiwa NSX-D5 (RX-N5K amp) One channel dead on the output at the back. Headphones have both channels fine. Double checked with both speakers on both outputs. Speakers are fine. Left ...

Left channel is dead,but with max volume both channels are ok. Is this a known problem? If you're saying the channel awaakens when you crank it, there is the slighest chance that a common control may ...

AUDIO AMPLIFIER'S ONE CHANNEL DEAD I HAVE GOT AUDIO AMPLIFIER MAKE:SONY ORSON MODEL:TA-AX44. PROBLEM : LEFT CHANNEL DEAD. Hi there. Check for shorted speaker wires on left channel. If not, disconnect ...