teflon coating has worn off, you will need to replace the ice maker. When the teflon coating wears off ic causes the ice to stick instead of sliding out easily. This snaps the drive gear on the module
Question about Kenmore Refrigerators
Teflon coating coming off trays and now complete failure For 4 years there were flakey bits in our ice cubes - I was told by a repairman who worked on the fridge for a different reason that these were
ice maker tastes terrible, the water from the despenser is fine just the ice is a problem remove icemaker and check that you have no eroding of teflon coating. you may install a quaity charcoal filter
ice from popping out of the frozen mold of the icemaker it is coated with nonstick teflon,just like the teflon on your cookware.That teflon is flaking off of the icemaker mold and the icemaker must be
...Whirlpool and Maytag uses that have the Teflon coating in the ice slots. Your model is for GE,=> Model WR30X10093 Ice Maker and has electronic controls and no replaceable parts. Thanks, Sea ...
about it. check the ice-maker itself, it has a teflon coating (like a frying pan) that sometimes flakes off leaving little black flakes in the ice. if this is the case you have to change the ice-maker
aluminum ice tray had corroded (in 5 years!) so bad it had cracked the teflon coating. I took the icemaker out ( 3 screws, 1 electrical connector) and the thing would leak water sitting on the counter
...teflon coating is chipped, cracked, or peeling, the ice maker will need to be replaced. If not, then you need a new water inlet valve assembly. You can order this part at, Reliable Parts, using your ...
...coating the surfaces with something nonstick, such as ArmorAll, or Pam. Perhaps they sell a teflon coated tray? Try turning the freezer temperature up. Apparently you have "Splash effect" where the ...
...ice is sticking inside the tray due to the teflon coating being worn out. Replace ice maker If you need assistance on how to install the icemaker or a place to order one please feel free to
118 questions posted
Usually answered in minutes!