...3 ton air handler and a 2 1/2 ton condensing unit - a 14 degree Delta T. Ambient temperature 85 degrees, suction pressure 70, head 210, txb valve, discharge temp high side, 158 degrees, exiting
My Trane thermostat (TCONT600AF11MAA) is supposed to have 1.5 degrees of heat pump "rest" above the desired setting before turning on the heat pump. The thermometer reading does not change ...
I just got a new heating unit installed. However it runs constantly. If the target temp is 68 degrees it will hit 68 degrees and just keep running. It does the same at 63 degrees. Is this normal? Dear
Question about Heating & Cooling
...that is because the thermostat internally reads in tenths of a degree. So when you set it to say 70 degrees, it is really set to 70.0 degrees. The thermostat will show 70 degrees when it reaches 70.5 ...
supply air is 74 degrees???????? low side supply air is 74 degrees???????? low side preasure is 69 psi high side preasure is 350 psi w/ outdoor temp. @ 97 degrees A-coil temp. is 45 degrees return air
...Three zones, each master/slave. One zone giving trouble. In one zone, with thermostat set at 61 degrees, heater does not kick on, even when ambient room temperature is 51 degrees. Cycling the ...
...our 225 sq. ft. bedroom. I put a thermometer in front of the grill and it blowing air at about 50 Fdegrees. I set the conditioner at 64 degrees. it's lowest setting, but the room was actually 68 ...
...The new unit will not hold temperature in the home when outside ambient climbs above 83-85 degrees. Refrigerant pressures early in the day (70-80 degrees ambient) look fine 70 suction 200 ...
8 questions posted
Usually answered in minutes!
16 Questions
