needle bar won't move up and down the feed dogs move, the motor is working ok but the needle doesn't go up and down This could be the needle bar clutch. Turn off machine. Unplug machine. Remove needle
...needle bar up until you see a block with a screw in the middle of it.bring the needle bar down useing the handwheel to its lowest position loosen the screw and you should be able to move the needle ...
...NEEDLE BAR FIREST U WILL FOUND TOW SLASH ON NEEDL BAR THE HIGHST ONE FOR HIGH OF NEEDLE BAR BRING THE HANDWHEEL AT LOSET POINT DOWN AND LOSE THE SCREW FROM INSID AND MAKE THE NEEDLE BAR AT HIGH SLASH ...
Question about Singer Sewing Machines
...needle bar won't go down when any of the pictures are selected to sew, duck bear. The letters work and all the straight stitches and zigzags. Any ideas? Hi Karen, Looks like your machine is stuck in ...
...needle bar). I?ve removed the bobbin casing, teeth under the feed dog plate and presser foot also, the bar. But now, the needle bar is not moving up & down. How do I to fix the needle bar so it will ...
...needle bar Needle bar is loose...you can take fingers and it will wiggle up and down Hello Doris Bentono Needle bars have two screws: one to tighten the needle in place and another on the opposite ...
...needle bar is out of position, ( some times thick fabric like jeans can move the bar)if you open the cover of needle bar and bring needle bar down there are two marked lines( horizantal) If its ...
...NEEDLE BAR POSITION TURN STITCH REGULATOR TO LARGEST STITCH, THEN TURN HAND WHEEL TIL' NEEDLE IS ABOUT TO ENTER NEEDLE PLATE. AT THIS POINT THE FEED DOGS SHOULD BE JUST AT OR JUST UNDER PLATE. IF SO ...
...Needle Bar slowly. I can't find anything about a needle bar in the instruction book about a Needle Bar. Just turn the hand wheel. The needle bar is the round bar that the needle is inserted into and ...
...needle bar has been pushed up and is out of adjustment. You need to take off the side cover, there should be a screw on the back of your machine holding it on. Remove this screw, and remove the ...
19 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions