Kenmore HE3 Steam 7.2 cu. ft. Super Capacity Electric Dryer "clean vent elite dryer" Questions

...clean dryer and venting. heavy lint build up in dryer normally means improper venting. all domestic dryer venting should never go over 8 ft vertical venting the less turns the better and if vent go's ...

...vent to ensure it is clear of any debris or obstructions. Clean the venting system: If you haven't done so recently, it's recommended to clean the entire venting system. This involves disconnecting ...

...clean, check your discharge vent hose for blockage or kinks. You may need to move the dryer out from the wall to thoroughly inspect the vent hose. while the vent hose is removed from the dryer, start ...

...dryer not drying clothes, cleaned vent, still no dry clothes, received new dryer from company, still not drying clothes, is there any thing else that could be the reason. my old dryer was working ...

...Elite HE 4 Gas Dryer Thanks, Dave Hi thanks for the question-yes if the venting is not good ,you dryer will take 3 times as long to dry the clothes. its a must to have a clean venting. clean all ...

...clean the dryer's lint screen, ensure that the exterior exhaust hood connected to the dryer is unblocked, ensure that the vent connecting the dryer to the wall is clear and see that the vent is ...

...clean your dryer vent and check the thermal fuse I have a kenmore elite dryer and the heat does not work in any settings... Mdel 110 c60952990.. .Checked main breaker fuse and open dryer cleaned all ...

...clean vent from wall to outside. to test this.. unhook vent pipe from wall..and run dryer and see what happens. or you have a defective heat coil I tried to help you. Please help me and Rate/Vote on ...

long time to dry Open the door after is has been running for a bit.  If it is hot inside, then you have a vent problem (clean the dryer vent and lint trap...kits are available for the vent). 

vent is cleared ,sometimes all of cust / think they clean out but instead make clogg even worse,,, repl/coils remove 2 screews 1/4 in from botom panel heating coils are black in color simple fix,,,,,,