Bulova Watch "crown moves second hand back" Questions

...moves 1 step at a time for each click of the crown. (2) Quickly Rotate the crown 2 or more clicks consecutively to move the function hand 4 revolutions and advance the date by 1 day. Rotate the crown ...

...moves one second. once it is back to zero push back the crown. Depending on your model you might need to pull out the crown with one click for the chronograph timers and another click for the second ...

...second hand is still running). Reset the time again, and it will run for 20 minutes and stopped. Any ideas ? My observation, when the crown is unscrewed into the winding position ( first position ), ...

...crown to position 1 while chronograph second hand or chronograph 1/20 second hand is returning to zero. Doing so will cause the position of the hands to be recognized as the new zero position. it's ...

...crown towards you (hands moves clockwise) until the date changes at approximately midnight. 3. Continue turning the hour and minute hands to the correct time. If it is afternoon you must go past 12 ...

...second hand click the bottom button to reset the timer pull the crown out all the way twist the crown forward hard and fast for a few seconds. The minute hand will start advancing very quickly. when ...

If you pull out the crown to the 2ed postion the push the upper start button that should move the second hand up to zero then push crown in. Thank you! I needed to do this myself, worked like a charm

crown out to the second position, the pushbuttons will control the other chrono hands. In this way you can set each of the chrono hands to their zero positions. Hope this works for you. Geoff I've got

...second...crown all the way out and top (start/stop button) does 30 second intervals for the minute counter. I have a Festina Chronograph and my second hand was sitting on 26" past. What I did was to ...

...crown to step 2 (full out) and then push the chrono top chrono button. Then the second hand will start moving one tick a time all through the dial. Keep pushing it until you reach to zero. then push ...