JBL PB12 Subwoofer "connecting speakers sub" Questions

how to hookup hi, if u want to hook up the sub with ur av receiver the connect the sub woofer output of ur AVR to any one (left or right) input of ur sub woofer. then connect its power . set the ...

How it can be connected to a stereo amp hi, if ur amplifier have a pre out, then u can connect that to ur L/R input of ur sub woofer. if not the only way is, connect ur amplifiers speaker output to ...

...speakers. Where could/would I send signal to the powered sub? You can y out from the main out to the sub.This output is post volume control. set level on sub to desired balance of lows feq to highs ...

...sub's speaker level output to the ceiling speakers. This configuration would require more subs. One option is to terminate each of the niles speaker output in each room to a wall plate (L and R). On ...

connecting it to.... If it's a stereo receiver or Hi-Fi amp, then the speaker cables that would normally go direct to the front L & R speakers now connect to the sub's L&R speaker OUT sockets.

...sub begins to blend with the other speakers. This is done with the Crossover knob just above the speaker wire connections. Whatever you have this set to, the main volume will now raise and lower the ...

...sub input and then use the output side to reconnect to the speakers. This is not convenient because of the extra wires, especially if the sub is anywhere besides right next to the receiver. Also, ...

...sub to the speakers where it is hard to tell you have a sub other than you your music now has deeper bass. Why do you need the Kenwood EQ? This is not a necessary piece as nobody really knows how to ...

...speakers connect directly to an AV Receiver that you buy a separate device. Here's the back of the sub. The sub either connects to the LFE Sub Out from the receiver to the white RCA/Phono Left Input. ...

...speakers; the sub will get its sound from the input speaker wires. 2) Cross-over 'Out': you connect the sub to the receiver using the receiver's single sub out, then connect the satellite speakers ...