JBL PB12 Subwoofer "connect speakers stereo" Questions

...speakers. The stereo turns on, but the sound does not come out. What do I need to do? Tell your son not to play with your stereo. Sorry that was a bit blunt. The Speakers from a bose system generally ...

...need to connect a stereo out from the amplifier to the transmitter for the speaker. I believe the speaker unit comes with the required adapters which will probably be rca/phono's to stereo

...stereo! One or more speakers could be blown...... The protection circuit is most likely doing its job, protecting your stereosystem from damage. If you have a extra amp connected to the stereo, check ...

unit same at speakers connections. Also check speakers. Blown drivers can short terminals internally. This is the most likely problem. Remove the short, unit will come back on buy a new stereo *******

...speakers on it. Just connect the wires up and you should be good. Some older stereos have and RCA jack, you still can use any speakers you just have to adapt the two wires from a newer style speaker ...

...connect Altec Lansing ADA-995 speakers to a stereo receiver ? You don't. They're already amplified via the amp that's inside the subwoofer. They're only designed for a headphone output on a PV or ...

...sound coming from the right side. How do I connect the left side sound? Thanks If you have the wires connected properly for stereo sound, go into the setup for the TV and set it for stereo

...STEREO (female) to RCA (male) cables 1. Connect the Altec's green wire to first stereo-to-RCA cable. RCA ends to DVP 3256's Front left and Front right 2. Connect the Altec's black wire to second ...

...stereo speakers. The sub's amplifier is not involved in driving anything external. For a picture of the back... ...

...connect the stereo's subwoofer RCA out to one of the Subwoofer RCA input jacks? Or do I hook up all the speaker wire of the Subwoofer for the High Level From Amplifier ''In'' AND High Level ''To ...