Question about Audio Players & Recorders
...sub is working and the cable appears to be okay or not. Most subs auto sense a signal. So if the Sony isn't doing that then there's the problem. Given that these are very much a budget sub, I'd be ...
...on but no sound from the sub. I have also tried to connect to a receiver that currently has a working sub. Unplugged the working sub and plugged mine in and still no sound. try using different ...
Question about Acoustic Research Audio Players & Recorders
sub is not working. I have speaker wire running from my receiver to the sub then from the sub speaker wire runs to the speakers, the speaker work great! I have tried running a single rca cable from my
...working. I have the same issue so I wound up joining the wires that go to the sub and the wires that go to the speaker together and place those connections into the sub. The sub works, the satellite ...
sub quit working after 30 minutes. I use the high level inputs, my amp doesn't have a sub output. I wasn't working the sub hard -- I was watching a DVD movie. I tried the sub with a newer JVC DTS amp,
Question about Celestion Audio Players & Recorders
...sub out is working on receiver. Tell your source (receiver???) that it has a sub and set it up to feed LFE out of that RCA jack. Prove your sub pre-out works. Or send something like FM on Tape Out to ...
...the presence of an audio signal is not working correctly and the sub is trying to reproduce 60 cycle hum. The unit needs service. Dan need a schematic for a sony sawmsp1 active
sub seems to be working fine. I tried setting the receiver to bypass and the sub will work with the left and right speakers but I lose the center speaker and the r and l rear speakers. So the sub does
sub. If it is not working still; bring it back and swap it for another one before you warranty runs out. OK if you came out of the receiver sub pre-out RCA jack into the subwoofer RCA jack ( most subs
Question about Boston Acoustics Audio Players & Recorders
...sub is working and the cable appears to be okay Switch off the sub and reconnect the phono/RCA to the sub out socket on the receiver. You now know it is connected correctly. Go in to the receiver's ...
12 questions posted
Usually answered in minutes!
151 Questions
87 Questions
76 Questions
51 Questions
54 Questions