DHP 301 Hi When i try to run the DHP 301 configuration programme i get the following error message MACDISCOVER.EXE HAS STOPPED WORKING Followed by RUN TIME ERROR 62 INPUT PAST END OF FILE I have tried
Kenwood TS 2000X: Low TX output on all HF bands ONLY. Symptoms include: No ALC metering. No SWR metering. No TX output power metering. Internal ATU beeps out high SWR in morse once AT button pressed -
hamming sound, sometimes no audio hello, I just want to find out what would be the problem with my vhf radio, I stored my radio for 11years and by the time thyat I,m gonna used it there,s a hamming ...
...is correct, then click "Add." 9. Everything should communicate beautifully. I had no further
...do this Windoz try?s to install the best-matched driver it can find and this can cause all kinds of problems. 1: Remove the device 2: Uninstall the driver and all the software that came with it 3: ...
Question about Computers & Internet
...made better than 50 Watts out this however never was a worry to me! 73s I have heard of similar problems and some were heating related. the best is to check if your rig is heating up causing it
TS 2000 KENWOOD TRANCEIVER I HAVE A KENWOOD TS 2000 AMATUER RADIO TRANSCEIVER WHICH I HAVE THE FEELING,HAS GONE SLIGHTLY DEAF ON RX.THE DEALER WHOM I PURCHASED IT FROM HAS TESTED IT AND RETURNED IT TO
sony ericsson w550i phone problem flashing Researching your problem ...
I have a Kenwood TS 2000. I recently started having problems with the pre-amp. I noticed that on the following bands: 20m, 17m, 15m, and 12m; when I put on the pre-amp, the incoming signal are ...
with a laserwire it only works if I am using port tg.1.4 If I use port tg.1.1-3 there are different problems. E.G. On one SSA the port does not come up or really bad port flapping If I use a sfp+ with
33 questions posted
Usually answered in minutes!
23 Questions
26 Questions
2 Questions
1 Questions