2002 Toyota Tacoma "code p1300 igniter circuit" Questions

P1300 = ignition system malfunction (#1 coil/igniter circuit fault) P1305 = same as above but #2 coil P1310 = #3 coil P1315 = #4 coil turn on the A/C and the compressor coil will not pull in. Jump out

code p1300 Possible causes - Ignition Coil No. 1 harness is open or shorted - Ignition Coil No. 1 circuit poor electrical connection - Faulty Ignition Coil No. 1 - Faulty Engine Control Module (ECM)

...code p1300 ignitor circuit malfunction #1 car starts after 2 minutes will stop Error Code P1300/ 14. Igniter signal malfunction No.1 Problem Areas: IGNITION SIGNAL--NO "IGF" SIGNAL TO ECU ...

...P1300 Igniter Circuit Malfunction / 14 P1305 Igniter No. 2 Circuit Malfunction / 15 P1310 Igniter No. 3 Circuit Malfunction /15 P1315 Igniter No. 4 Circuit Malfunction you got this fixed?i am having ...

...code p1300 Error Code: DTC P1300 Description: Igniter Circuit Malfunction Solution: To repair the code please do the following: 1. Check spark plugs. 2. Check for open and short in harness and ...

p1300 code 1998 4runner P1300 (DI–128)Igniter Circuit MalfunctionS Ignition systemS Open or short in IGF and IGT circuits from igniter to ECM S IgniterS Ignition coilS ECMI found this online, I ...

...P1300 code is for the ignition coil No.1 and is set when there is no IGF signal to the ECM during engine operation. Possible causes: Ignition Coil No. 1 harness is open or shorted - Ignition Coil No. ...

...CODE P1300 RANDOM MISFIRE DETECTED. POSSIBLE CAUSE BAD SPARK PLUGS OR FAULTY WIRES.CHANGE FUEL FILTER CLEAN FUEL INJECTORS. MORE THAN 1 CYLINDER MISFIRE COULD BE LEAN FUEL MISFIRE. P1300 is ignition ...

p1300 code on 4 cylinder 2000 toyota camry were told was an ignition control module at 500.00 then that it doesn't even have one?? which is right? P1300 code is for a faulty ignighter circuit ...

I am getting codes po308 p0420 p1300 P0308 Cylinder 8 Misfire DetectedP0420 Catalyst System Efficiency Below Threshold (Bank 1)P1300  Igniter Circuit Malfunction - No. 1.