2001 Toyota Echo "belt tension" Questions

...belt per #1 set tension to spec. stated in FSM. some are set real tight. done. wow toy shows route on parts page, nice note 2 belts on some ...

...tension is loose or the belt is going hard. Check the tension on the tensioner pulley and condition of belt. The belt is slipping on your accessory pulleys when a load is placed on them such as power ...

...ON TOP Loosen the drive belt tension by turning adjusting bolt and remove the drive belt. Install the drive belt. Apply drive belt tension by turning adjusting bolt. VERY SIMPLE TO DO HOPE THIS ...

Replace ac belt fsm covers this , no year, so can say. release belt tension remove old belt put on new set tension or if autotensioner, let it do its thing.

...belt is there a tension pulley or just adjust by the alternator? The only way to loosen and tighten the serpentine belt is by loosening the alternator and sliding it back or forward. There are TWO ...

...belt still doesn't come close. Is there something that I am not doing (i.e. idler pulley tension screw, etc.) there is a bolt attached to the idler arm, if you get the right size socket and a good ...

broken alternator belt, need info on replacement, 2001 toyota echo go to toyota buy a fan belt, i think u can see a belt adjuster need the belt and engine , you just need to adjust the belt to very ...

...belt tension Squealing noises stem from the belt slipping. If you have a belt that's shaped like a "V"when viewed on a cross-section, then you simply need to tighten the belt. If you have the ...

...tension on the old belt. Remove the old belt. Use the breaker bar again to pull back the belt tensioner and install the new belt following the pattern listed on the sticker that should be on the ...