...car sounds like it is an airplane taking off. It does not appear to be engine related. Noise increases with speed even in neutral. Slight burning smell - unknown source, not in engine compartment. ...
engine sounds like an airplane Engine sounds like an airplane taking off Sounds like the engine cooling fan clutch is defective. If it remains locked up the noise does sound like an airplane.
Question about Toyota Avalon
... we changed it, and then the winding noise started. it sounds like an airplane taking off and it stops when you let off the accelerator Check engine pulley and engine plastic covers for loose ...
Question about Chevrolet Cars & Trucks
...engine that runs too cool, even with a 210 thermostat change the fan blade clutch, it might be stuck, does it sound like a airplane taking off ? if nothing else put a smaller and direct fan with no ...
...engine makes a roaring sound like an airplane getting ready for take off at low speeds. I heard it could be the fan coil? If the fan is connected to the water pump, it could be a fan clutch problem. ...
...airplane taking off? During acceleration and deceleration Check the fan clutch on the front of the motor. With the engine off try to rotate the fan by hand. It should spin fairly easy. If it is hard ...
Question about Cars & Trucks
...airplane taking off with a slight rumbling could be anything most rumbling is a stone or something in the tyers or a bearing, or even a stone in the discs. if rumberling stops when only applying the ...
... and is spinning the starter on the fly wheel/ flex plate. the best way I can describe it is a weeeeeeeeee sound and when you turn the engine off it sounds like a jet airplane shuting down. J J ...
...sounds like an airplane taking off when the engine first is cranked after setting for a period of time. It takes 10-20 minutes for this to settle down. When you slow down, it makes this noise as you ...
...engine sounds like jet airplane engine. Thank you in advance. taking it that you had the timing belt changed the job may not have been done correctly and the belt is not tensioning properly resulting ...
332 questions posted
Usually answered in minutes!
447 Questions
308 Questions
347 Questions
251 Questions
226 Questions