1997 Toyota Corolla "camshaft mark timing" Questions

...mark of timing case. The camshaft sprocket is at TDC when the hole in the sprocket lines up with the notch in the bearing cap Timing marks 2000 Toyota Corolla (1ZZ-FE/ 3ZZ-FE/ 4ZZ-FE/ 2ZZ-GE) Set the ...

...mark, the slide on the timing pulley. Align the camshaft knock pin with the knock pin groove of the pulley, and slide on the pulley.  Align the camshaft knock pin with the groove on the pulley ...

...mark on your camshaft and crankshaft is perfectly synchronized before putting the cover/ manually rotate the crankshaft pulley again and see if it rotates 360 deg. freely then you can be sure you did ...

...timing on camshafts/and bottom pully and ... the bottom pully has a mark on gear and casing and the KEYWAY should be dead straight up. and the camshafts have timing marks on the gears and casing ...

...crankshaft for toyota carina 1993 single overhead camshaft hi what engine size is it i have a diagram of the timing marks for a 1.6 single ovc engine if you want it email me ...

...through this hole, you will find a pin hole mark there. With the crankshaft pulley at 0 degrees, this hole in the camshaft gear should exactly align with the pin hole of the camshaft bracket number

timing marks need timing marks for 1994 toyota corolla If you have the 16.L, here you go... camshaft timing marks for a 1994 toyota corolla 1.8

...timing cover out but forgot to align the marks, and i think i move my camshaft now i need to set the marks again , what u think me think you um not give enough information. You changed the belt? Just ...

...camshaft mark with the mark on the the head, the mark on the crank pulley must line up with the 0 or TDC mark on the timing cover. the distributor rotor must point to number one post on the ...

...mark on the crankcase at the 1 O'Clock position. For the Camshaft gear, the small hole under the " 4A " on the gear should line up with the indent on the front camshaft bearing cap. The approximate ...