1992 Toyota Previa "tighten timing belt 2" Questions

...tighten bolt. Remove: Timing belt lower cover [7]. Crankshaft sprocket guide washer [9]. Timing belt. Tensioner pulley. Installation Installation 1. Check tensioner pulley for smooth operation. 2. ...

...timing belt side engine mount, tighten bolts to specification in sequence. See Fig. 6 . On MR2, tighten engine Hope this helps, don't forget to rate. Lazaruselite I can show u how to do it or email u ...

...mount before tightening to specification. 14.On Camry, when installing control rod and bracket on strut tower and right (timing belt side engine mount, tighten bolts to specification in

...timing belt tooth, tighten the mounting bolt and one by one. Tightening torque :19.6 ~ 26.5N.m (2.0 ~ 2.7kgf.m, 14.5 ~ 19.5lb-ft) (3)Then recheck the belt tension. Verify that when the tensioner and ...

...Tighten timing belt tension lock bolt to 27-38 ft lb (32-52 Nm). Apply a force of 22 lbs to timing belt between camshaft sprockets. Belt deflection should measure 0.30-0.33 in (7.5-8.5 mm) NOTE: ...

...timing belt to tension belt. STEP 3. Tighten tensioner pulley bolt [8] . Tightening torque: 43-55 Nm. STEP 4. Except Matrix: Turn crankshaft one turn clockwise. STEP 5. Matrix: Turn crankshaft two ...

timing belt to tension belt. 3. Tighten tensioner pulley bolt [8] . Tightening torque: 43-55 Nm. 4. Except Matrix: Turn crankshaft one turn clockwise. 5. Matrix: Turn crankshaft two turns clockwise. 6

...Tighten tensioner lock bolt. 4) Install timing belt covers. To complete installation, reverse removal procedures. Tighten all bolts to specification. See TORQUE SPECIFICATIONS table at end of this ...

...Tighten the timing belt cover bolts to 71 inch lbs. (8 Nm). Install the power steering pump pulley and bolts. Install the water pump pulley and bolts. Tighten the power steering pump pulley bolts and ...

...timing belt cover. Tighten the No. 1 idler pulley set bolt to 31 ft. lbs. (42 Nm). Be sure there is belt tension between the crankshaft and camshaft timing pulleys. Place the right-hand engine ...