1990 Toyota Corolla "replace back window brake light" Questions

...back window not working We replaced the bulb for the brake light but it still didnt work. Noticed the light in the back window not working either. Unable to figure out which fuse it may be but left ...

...not now what else to check for any advice will gratefull. does the brake light in the back window work? if so, the switch is good. check for power at the bulbs. Green/White wires are for brake

...window. Fuses have been checked, they are fine. Lights, hazards and directionals work. What could be wrong??? to ss1957, i have exactly the same problem as yours. At first i thought the bulbs of both ...

...replace the bulb in the 3rd Brake light assembly in the back window? I just checked all Toyota service bulletins on ALLDATA and MITCHELL for this model year and found nothing. Let me know what your ...

...replace it. It could be your MAF Mass Air Flow Sensor a bad resistor inside the sensor can cause a rough idle(MAF measures the air going into your engine and can cause many problems.) On top of that ...

window down and opening from outside, eventually outside broke on outside so spent close to 400 bucks to get that one handle(inside and out fixed). also my rain guards in the doors were falling off so

...back window doesn't light up either. I give up! The brake lights are engaged by a switch when you press the brake pedal. It is a plunger type switch, then when released, turns on the lights. It ...

...brake light bulbs: if that doesn't work then please report back for additional options. i replace bluds on the right side cause the blinker was flashing fast but no lights n tail but on in back ...

...back window brake light works and so do my tail lights and turn signals. 01 chevy malibu if rear window stop light works has blown globes in other 2 tail and stop are different circuts fit 2 new ...

back turn signals do not work, replaced bulbs, front turn signals work, brake light does not work. but brake light works inside the car on rear window. OK try this turn the signal light on one side or