1996 Toyota Camry "air intake hose" Questions

my 95 toyota camry v6 stalls upon accelerating , no power and slows up hills. I replaced the air intake hose. any suggestions? I changed the air intake hose so far. Plug up catalytic con.

air intake just after the air cleaner and before the throttle body.If you mean the Manifold Air Pressure sensor (different) that sits on the firewall flange behind the intake manifold. Follow the hose

air intake temperature sensor, which is located inside the air cleaner housing, but the car has a cold air intake system instead of an air cleaner housing. What could be my problem ? 1. Error Code 24.

...air intake hose was found to be broken was removed so that i can spray starter fluid to start it but nothing.... wat can itz a 4 cyl. 2.2 eng.tune up has been done , have not changed the fuel pump, ...

AIR INTAKE IN MY 95 TOYOTA CAMRY See here p147 for a diagramhttp://www.turboninjas.com/camry/eg1.pdf The PCV valve and hose are on the suction (vacuum) side of the throttle, and this is meant to

...air intake hose (black hose), remove the throttle cables and hoses. For best results, use different color fingernail polish to mark the hoses and where they come from, remove the 3 or 4 bolts, slide ...

...air intake hoses, and there is no water/moisture present within the air intake box or hoses. Examine the air filter for clogging and excessive moisture, this may cause the engine to run rich also. ...

where is the air intake hose on a 2003 camry? That would be the large hose in between the air filter housing and the throttle body.