...hard is it to replace the compresser Replacing the AC compressor is a job in itself and normally not for the do it yourselfer. If you replace the compressor be sure to get some AC flush and flush out ...
Question about Toyota Previa
...hard to remove with rust there is no limits on rust and its effects. ever. what will be, will be. in a real shop they have tools to handle all states here. 1-cut off the bolt and replace them., 2-or ...
...skin at this point!), Drivers side was easier. 7. Persuade the wishbone to come away from the hub assembly, also quite hard! 8. Refit in the reverse order, tensioning the torsion bar to previous ...
hard. Lift the wiper assembly out. If the wipers are standing straight up when turned off then keep reading: The parking pawl probably has a broken spring and is not working correctly. The pawl is a 1
...skin right off of them. Don't be afraid, just be deliberate and methodical and always be aware if the motor/electronics are energized. It is very easy to remove the motor/wiper assembly so do not ...
...skin. Wash it off with water! Another thing, it will kill your pets if they drink it, so keep them, and children, away from it, remember, I warned you!:-) Some vehicles have a vent plug. It's located ...
...skin, was vigorously before continuing. Step 9: Note the position of the connector before you do anything. Turn the retaining rings holding each bulb counter clock wise. When you do this the bulb ...
hard to find ( DORMAN part # 963-040 fit most newer Gm's) Autozone. Behind the skin you will find wires going to the wiper & window and locks. Then a plastic sleeve held on with black rubber stuff
...skin. Wash it off with water! Another thing, it will kill your pets if they drink it, so keep them, and children, away from it, remember, I warned you! Some vehicles have a vent plug. It's located ...
219 questions posted
Usually answered in minutes!
237 Questions
216 Questions
229 Questions
195 Questions
116 Questions