1994 Toyota Previa "filling radiator sure full" Questions

...sure you put as much coolant back into the system as you removed. Fully warm up the engine, and let it cool down before removing the radiator cap, then check for air in the system, topping up as ...

...sure to follow the manufacturer's instructions. * Markings on the thermostat normally indicate which end should face toward the radiator. Regardless of the markings, the sensored end must always be ...

...radiator cap that prevents backflow can cause problems as well. Not sure it will work on your car , I don't have one of those. On many cars you can check if the radiator is full by squeezing the hose ...

sure of your vehicle, but... If you have a radiator cap on the radiator, you can fill it there, and the coolant overflow tank should have a full line, so fill that to there. Make sure you use a premix

...sure radiator cap is seated properly. Start engine and see if there are any leaks from hoses or radiator. If all is ok let engine cool off and make sure water is full. Start engine with radiator cap ...

off with the radiator cap.Be sure to fill coolant reservoir up,a little past the full mark.so it can fill it self as needed.If there is not enough coolant in the system,it will do what it is doing now

...sure the car is cool before open the radiator cap. -Open /lose drain plug under the radiator to let all the old water out then tight it back on and re fill the radiator to full. -Run the engine to ...

...filling it to the "Fill" or "Full" level. If your antifreeze tank is empty, remove your radiator cap, (make sure the engine has cooled off. If you try to open it while it's hot, you could get sprayed ...

...radiator. Make sure when you fill up the cooling system, that you fill it cold, and that the vent screw in the radiator is loose. fill system until fluid comes out the vent screw. tighten the screw, ...

...sure it's not broken or otherwise cracked. and fill the the respective level line (when engine is cold or hot). You may be able to simply use a 50-50 prestone blend or full strenght if the existing ...