1994 Toyota Paseo "clutch stuck truck" Questions

Ad

Question about Toyota Paseo

1 Answer

...stuck in gear try double clutching(come out of 3rd then push clutch twice b-4 going to 4th. if this works your clutch slave may be weak or pressure plate is worn. Try shifting from 1st-3rd if engine ...

Ad

Question about Toyota Paseo

1 Answer

...clutch stuck to floorboard 95 Isuzu Rodeo V-6 3.2 Was at intersection stopped, engaged clutch and I heard a loud pop and truck would not shift & clutch pedal stuck to floor.Drove mile & 1/2 in 1st ...

Ad

Question about Toyota Paseo

1 Answer

...it to another gear If the cluctch does not engage at all, or the clutch pedal is stuck then it is a problem with the clutch gear behind the pedal or with the clutch steel cable, have them

Question about Toyota Paseo

2 Answers

...Stuck A/T Clutch Pressure Control Solenoid Valve A Stuck OFF P1732 Problem in Shift Control System: Shift Solenoid Valve B and C Stuck ON Shift Valves B and C Stuck P1733 Problem in Shift Control ...

...stuck to floor Clutch was squealing when fully engaged, pedal stuck to floor when shifting from stop. I pulled pedal up, made it home parked my car. Got into car to move it clutch went to floor and ...

...stuck and stalls when clutch is let out Here's the link and I'm sure you will get the solution of your problem. Best Manuals so , it seems the engine does start in gear, with clutch depressed. or ...

...stuck in 4th gear If it is standard, could be a bad clutch or clutch cylinder, sounds like a bad slave cylinder on the clutch. Check the clutch fluid level. Should be near the brake fluid and should ...

Question about Toyota Paseo

1 Answer

...p0741 is tc clutch system stuck off, p0742 is the same but stuck on. p1860 is torque convertor clutch pulse width modulator solinoid curcuit, p1887 is tc convertor clutch release switch

...clutch stuck or not working properly code 1744 Torque Converter Clutch System Stuck in Off Position Possible causes - Low transmission fluid level - Dirty transmission fluid - Faulty torque converter ...

clutch pedal stuck to the floor on a 1995 f 150 Most modern clutches are hydraulic. It may be that either the clutch master cylinder or slave cylinder are stuck or some sort of restriction in the line

Not finding what you are looking for?
1994 Toyota Paseo Logo

74 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...