1993 Toyota Camry V6 "3" Questions

cylinder numbering for a V6 engine of a 1990 camry For the 2.5L V6 DOHC: Firing Order: 1-2-3-4-5-6 Cylinders: ......(back) 1........3.........5 2........4.........6 ......(front) Distributor: ...

96 Toyata Camry, V6 missfires on rear bank. Has fresh plugs Cyl drop test front 3 are good, no drop on rear 3 is there something common on the rear 3 no drop no compression

...drive belts. 2. Support engine. Remove: Engine mounting and bracket. Timing belt upper cover [1]. 3. 4. Turn crankshaft clockwise to TDC on No.1 cylinder. Ensure timing marks aligned [2] & [3]. ...

Car beeps 3 times repeated 8 times when igintion goes to off Whenever the ignition goes from the on to the off position, the car beeps at me in 3 quick beeps repeated 8 times. There are no warning ...

on Toyota camry 4 cyl myself. Engine running rough. engine check light came on. Code says cylinder #3 misfiring. I am replacing all the wires and plugs, but I am just wondering which cyl is 3. It is 1

...INSTALL CYLINDER HEAD if any bolts broken or deformed , replace it. 7------2-----4--------6 5------3-----1--------8 FRONT sequence head bolts 8-------1-----3-------5 6-------4-----2-------7 CYLINDER ...

were is the relay fuse for the high beam in the 02 camry Your circuit is complicated. There are 3 DRL (DRL #2, 3, and 4)relays associated with the high beams. There are also 3 fuses for the high beams

firing order of a 1984 4 cylinder toyota camry 1-3-4-2 hi the firing order of your car is 1,3,4,2 as you look at the engine from the front of the car starting from the left hand side the first plug is

I have p044 code for Camry 2004 P0044 - HO2S Heater Control Circuit High (Bank 1 Sensor 3) The P0044 is set when the ECM detects an excessively high voltage through the heated oxygen sensor heater ...

come on as normal and I had AAA check the battery. It's fine. Strange part is I can try to start it 3 times without success but in 2-3 minutes it will This has happened 4 times in the last 3-4 months.