1991 Toyota 4Runner "brake" Questions

what tools needed to replace front brake pads & rotors Brake Pads Removal & Installation Front 3.4L front disc brake assembly 4.0L and 4.7L front disc brake assembly To Remove: Before ...

i have a 1990 4runner v6 and no brake lights. running lights and turn signals work fine. i have replaced the brake light switch and all fuses are good. when i pull and replace the fuse and then step ...

when push brakes you have to push really hard to make them go in then the truck barely stops. Replaced the MC and bled the brakes now every time push brakes truck acts like its going to die. Brake ...

I had to unhook the brake line on the right front tire (1998 4runner)to remove the starter, wondering what I need to do to bleed the brakes now. To bleed the brakes you need someone to pump the brakes

2006 tundra, v6 4.0 standard trans. 70 k. Brake pedal started going to floor in the morning, hard by afternoon, front brake calipers sticking hot to the touch. Replaced calipers today, bled front ...

brakes sink to the floor by stating that your pedal sinks to the floor, you leave 3 options open 1.) the master cylinder seal is bypassing allowing the fluid to bleed by the proper correction is to ...

will one brake light being out cause all brake lights to not work? the high mount brake light is burned out. will that stop all brake lights from working? no the high mounted bulb being burned out ...

toyota 4 runner brake booster noise Noise from brake booster usually after cranking the vehicle and randomly while driving? The dealer suggested replacing it or could see possible failure. Any ideas? ...

toyota 4runner brake i have all new brakes ,calipers,master cylinder,brake booster,even a rear paportioning valve and i still have no brakes can you help me please. Did you replace these all by ...