2007 Toyota Tundra "tailgate handle" Questions

...handle remove the access panel on the inside of the tailgate, lube all parts with WD40 also the locking devices at either side of the gate. Also make sure there is no body metal dented inward that ...

Tailgate won't open. Latch handle lifts but gate doesn't unlatch I know this sounds silly, but is the latch locked? If I lock mine, the latch will lift but the gate won't open. I had the same problem

tailgate won't open. unscrew the plastic on the inside of tailgate,once inside,squeeze two bars together,you can replace handle then

...handle on the inside of the tailgate was used and the tailgate.could be opened from inside the car. Further investigation found that the warning light on the dash is showing that the tailgate is open ...

...tailgate closed and lift the handle a little and look under it (inside tailgate). You will see two vertical metal pieces. One on each side. These connect to the rods that run inside the tailgate and ...

...tailgate handle and check and see if the rods are still connected to the handle. i closed the tail gate on my 2006 chevy 1500 seril pick-up truck and now it does'nt open Pull the black plastic plate ...

handle on tailgate wont open i have a ford f-150 tailgate, one day i tried to open it but when i grabbed the handle to open it it dosnt seem like it catches anything to release the bars to open the ...

tailgate handle I just purchased a new tailgate handle from GM parts. Need some tips on how to replace old broken one. Do I only remove star screws from the inside of the tailgate? Do I need to remove

handle to the tailgate from the outside and remove the broken latch. Remove the pull handle loop on the interior side of the tailgate (2 screws), unsnap the inside plastic tailgate interior panel, and

tailgate if handle or cable is broken on 2003 sequoia I had the same problem with my 02 Sequoia. To get the tailgate open and replace the broken handle you will have to remove the tailgate's panel