2007 Toyota Corolla "steering wheel rubs turning" Questions

...of your car wireing,,see if you have a wire that has over time been rubing on steering colume,, may have rubbed a spot on a wire thats not shorting out when u turn wheel,,thats the first thing id ...

...steering wheel clicks when i turn it what do i do I've seen the plastic covers not go together correctly and rub the steering wheel. try removing the Key and tumbler and turn the steering wheel. Is ...

...steering wheel turns.if i jack the front right wheel up i no longer hear it when i turn the steering wheel.I have a mazda 6 it only does this if you turn the steering wheel.if i go straight without ...

...Steering wheel makes squeking sound when turning steering wheel to both sides. Quiet on strait roads. Sounds like plastic rubbing when turning steering wheel. Sprayed lubricant on rubber. Took off ...

...steering wheel are 2 pins. These pins turn the signals off as the wheel returns from making a left or right hand turn. They reset the blinker mechanism by bumping the blinker arm and pushing the arm ...

...steering wheel every time I turn a corner, back up and turn the wheel, or turn into a parking space. Most of the time it is when I turn the wheel to the left. All fluids have been checked and the ...

steering wheel makes "rubbing" sound when I turn it When the car is warmed up, the steering wheel makes a rubbing sound when I turn the wheel both left and right. Sounds like the sound the seat belt ...

...steering wheel sharply to the left at parking lot speeds. If you let go of steering wheel and step on brakes does the wheel vibrate? I'd say its either warped rotors, power steering malfunction, or ...

...steering wheel. It is NOT the power steering pump; the noise comes from the steering column in the cockpit. If I don't fix this problem is there a safety hazard associated with it? If ...

...steering wheel to the right, i hear a clanking sound like metals rubbing against each other. more so if i am going down on a slope. can you posibly give me advise on this? You have a bent tie rod or ...