2007 Toyota Corolla "replace oil control solenoid" Questions

Ad

Question about Toyota Corolla

1 Answer

oil pan. Remove the shift solenoid valve No. 1 or No. 2. CHECK: Measure the resistance between the solenoid connector terminal and the body ground. Standard: 11 - 15 W at 20°C (68°F) Connect

Ad

...replace that. They do go haywire from time to time. Also check the electrical connection plug first, oil aand contamination can cause the same problem. Cleat both ends of the electrical plugs first ...

Ad

...oil. Is the heck engine light on? If so, you need to get the code read. If not, check for loose connection around the air intake and mass air flow sensor. Also check for disconnected vacuum hoses. I ...

...control solenoid valve bank 1 circuit connectors - Intake valve timing control solenoid valve bank 1 - Dirty Oil Possible Solutions: - Change Oil - Replace Intake valve timing control solenoid ...

Question about Toyota Corolla

1 Answer

...timing control solenoid valve uses oil flow to control timing, dirty oil can cause the valve to stuck open or close. Before replacing the valve, change engine oil and filter and reset engine

...oil control valve and the solenoid next to it. still the code came back answer courtesy of obd-codes.com Potential causes of a P0026 diagnostic trouble code may include: Low engine oil level or ...

Question about Toyota Corolla

1 Answer

...oil - Replace exhaust valve control solenoid P0047 - Turbocharger/Supercharger Boost Control A Circuit Low This vehicle is not equipped with a turbocharger or supercharger if it is a 1994. P0137 - o2 ...

...oil flow to control timing, dirty oil can cause the valve to stuck open or close. Before replacing the valve, change engine oil and filter and reset engine code. When is the code detected? When there ...

...> p1111_nissan Since the Intake valve timing control solenoid valve uses oil flow to control timing, dirty oil can cause the valve to stuck open or close. Before replacing the

Question about Toyota Corolla

2 Answers

oil control solenoid. If it is out of spec, too high, an intermittent fault will occur until the resistance gets so high or goes open circuit and the engin performs poorly. My experience has been on a

Not finding what you are looking for?
Cars & Trucks Logo

812 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Toyota Corolla
1998 Toyota Corolla

1,231 Questions

2003 Toyota Corolla
2003 Toyota Corolla

1,240 Questions

2005 Toyota Corolla
2005 Toyota Corolla

1,236 Questions

1994 Toyota Corolla
1994 Toyota Corolla

819 Questions

1996 Toyota Corolla
1996 Toyota Corolla

767 Questions

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...