2007 Toyota Yaris "rear brake shoes" Questions

...Rear brake drum (Scored) 4. Brake shoe (Dirty). 5. Brake shoe (Glazed) 6. Tension or return spring (Faulty) 7. Anti-squeal shim (Damaged) 8. Shoe hold down spring (Damaged). 6. Apply a thin layer of ...

rear wheel brake lines?? Look at the master cylinder fluid level. If it is low, the red brake lamp will come on. Note that as the front brake pads wear, the brake fluid level will drop proportionally.

...them. Then push the pistons back some more enough to get the new pads in. Then reassemble and test. how to adjust the rear brake shoes on toyota yarris verso which way do you turn the adjuster

...Rear Brake System Standard Rear Brake Item Part Number Description 1 2069 Brake Shoe Hold-Down Spring Pin 2 ? Rear Wheel Cylinder Retaining Bolt (2 Req'd) 3 ? Washer (2 Req'd) 4 ? Anchor Pin (Part of ...

...rear brake shoe and connect parking brake cable to rear shoe with washer and clip. Install front brake shoe and install bottom return spring. Install hold-down pins and spring clips. Position ...

...rear brake shoes on 2004 honda accord Brake ShoesRemoval & InstallationTo Remove: Raise and safely support rear of vehicle. Remove rear wheel assemblies. Release parking brake. Remove brake drum. ...

...REAR BRAKE DRUM SUB-ASSEMBLY 1. Release the parking brake and remove the rear brake drum. If the rear brake drum cannot be removed easily, do the following:- 2.Remove the hole rubber and insert a ...

rear brake shoe replacment help. Brake shoe removel: Depress and turn the retainers for the hold-down springs and pins to remove them from each shoe. Slide the brake shoe assembly--including the shoes

...rear brake drums from hub and bearing assemblies after loosening the two brake drum screws. 3.Be sure that the parking brake pedal is in the release(most upward) position. 4.Completely loosen square ...

...rear brake drum to get to the brake shoes. i think your aware of how to change the brakes if im right and your problem is the rusted drum doesnt want to come off the only way to get the old drum off ...