2004 Toyota Corolla "1994 door removal" Questions

...1994 toyota corolla - 4 door theres no cable in toyota corolla 1994 check the speed sensor or replace speedometer have same problem with my 1993 toyota corolla could be a problem with the cable. the ...

...1994 corolla. Can I use a slim jim to open the door? yes you canit is easier to use a coat hangeron the pass side use a large screwdriver with a rag over the tip to pry the top edge of the door open ...

Interior lights dont work. Dash lights or dome. No owners manual, is there a single fuse if so which one. the driverside to left of where your left foot would sit is a door, remove the flap door and ...

Need help on how to change it door handles broke inside and out on driver side,is it hard to change myself not hard, you just have to remove the inside door panel first. its held by plastic clips and ...

how to change it myself door handle broke inside and out on driver side get a manual from the library or parts store; usually a couple of nuts on the inside of the handle. Doable but frustrating. Very

we have bought a new rear window for my sons 1993 corolla as the support mechanism had rusted and you cannot by it without the window - now we cannot get the window inside the door. We have the ...

...1994 mercury grand marqus, Easyest way to remove inside car door pannel to view powder windows motor and levers and examine to check out problem, . in short easyest way to remove door pannel. Thanks ...

...door panel from 1994 passat how i remove a door panel from 1994 passat lose the handel bars by se and push to the rigt way. unsrew al srew on cover some are insde the door handel. the juice a flat ...

...1994 honda passport? hello there: to replace the window regulator you will need too look for screws around the sides and bottom of the door panel then you will need to remove the door handle backing ...

door lock cylinder in my 1994 K1500 Blazer. I can get the handle unfastened, but not removed from the door. Also, can't figure out how to remove the retaining clips on the rods. in order to remove the