1995 Land Rover Discovery "door hard open" Questions

...door wont open or tailgate windoe wont go down,the rest of the doors work. help try a hard restart, if that doesnt work then you need a new rear window motor. for the hard restart all you have to do ...

...hard with door locked; at bottom of door panel is four philips screws take them out and then the panel pulls from the bottom up,cut round water shredder and you can operate latch manually to get it ...

...door is open and leaves the interior light on and sets the alarm off. The car is a rover 75 , its not on your options Thanks. Without testing it's hard to say. Try changing the small battery in the ...

...door door hard to open car door is hard to open from the outside. Keylock works fine. Door handle is new. Replaced the door outside door handle because it was broken trying to open a sticking door. ...

...door left side is hard to open. it gives me a hard time. any ideads. ive tried to greese it. Are the door hinges OK. The doors are heavy and often the bushings wear out making the door hard to

...hard on the drivers door handle to get the door open. since then i have to pull really hard on the handle for it to open and wondered if i could have stretched the cable. i wondered if any adjustment ...

...which is a little hard with door shut but it can be done and probably replace door Handel if the Handel it's self is not broke it's most likely just a little plastic clip that holds the rod to the ...

door hard to open and close i had my door open and i was backing up. i backed into my solid dumpster with my driver side door. it is hard to open and shut now If you are lucky, you can adjust at the ...

...door. well that is easy, or hard. 1: easy, connect scan tool bingo, you get scan DTC codes for door. 2: hard, use a voltmeter at every door switch , bingo, bad switch or wire or corroded ...

...door hard to open/close by hand The driver's side sliding door drags and if very hard to open and close manually. Works fine with the key or buttons. What is my problem? i'd suggest you just grease ...