2000 Renault 181 "immobilisers fault code reset" Questions

fault with the immobilser systems. Does anyone know the code to deactivate this via the central locking button on the dash?? Any help would be appreciated, I am in New Zealand and not too many Renault

...fault code 1622 Nissan Navara P1622 - Engine-Codes.com www.engine-codes.com/p1622.html Possible Causes and Repair Information for P1622 code. Learn what does P1622means? P1622 Immobilizer ID Does Not ...

...fault with the lock. only other way is to get the pass code from toyota but they may not have it as it is a 1995. the only other way is to have the immobiliser sent off to a company that can retrieve ...

I have a 1999 Mazda Astina, I have crank and cam angle sensor signals, but I have no injection pulse or coil spark. I think it may have something to do with the immobiliser but I have no testing ...

...fault codes Check for cam/crank position sensors problem . Check that the cam shaft is turning ( broken timing belt/chain). Check that immobiliser is operational. If you have disconnected the battery ...

...people who make adhoc fixes generally screw up the system. If you can remove the add -in bit and use a code reader to reset the CPU and immobiliser . At least you have a point to chase down the ...

code. Have you recently taken a sharp curve? Some cars I have seen with this problem come equipped with a safety shut-off switch to ensure the engine stops if the car rolls over or takes a sudden jolt

...fault codes and check for cam/ crank position sensor problem. Check that the cam shaft is turning (broken timing belt/chain). Check that the immobiliser is working as a disconnected battery ( starter ...

...fault codes on my Volvo s40 2.0 diesel 54 plate. Adm-000a, adm-e010, adm-0002. And the following message is displayed; immobiliser see manual. The car won't start at all, thanks. Looks like a reboot ...

...reset the chip key? If so how? There is no button on this key. This key does not have a central locking button on the key. run the fault codes first to see if the immobiliser is at fault. IT could be ...