2002 Hyundai Santa Fe "drive" Questions

...the pulley. Tell you what... No response, then I can't help. If you're talking about the accessory drive belt tensioner pully, there are two 12mm bolts which mount it to the engine. You'll need a

clunking sound When I brake in reverse or drive i get a clunk as if the brakes are grabbing after i am stopped . Tried it in neutral and there is no clunk The drive shaft is engaged when in drive or ...

2001 hyundai santa fe starts with one crank but won't go into drive or reverse, only goes into park and neutural what could be the problem? i have a 2001 hyundai santa fe 2.7 l v6 all wheel drive ...

hit wall with left front tire; now DBC is glowing red and ESC is glowing yellow. Can I drive Santa Fe? Or should I have it checked immediately 2012 Santa Fe; light continues to come on each time I ...

...I looked for an owners manual and you know it did not have one My question is the car and all wheel drive or is it does it have a switch somewhere that I have not found yet to make it 4 wheel drive ...

2006 Hyundai Santa Fe with a 3.5 motor. What size Allen wrench is needed to remove the rear drive shaft in it please? This shows it as a standard hex bolt. ...

why when i put in drive and go it goes into 1 or2 or drive by it self while driving It always starts out in first, it's a 3 speed automatic, that's what automatics do. they start out in first and at ...

four wheel drive button for santa fe 2001 model where to find the four wheel drive button for santa fe 2001 model, automatic transmission There no four wheel drive button, it's permanent AWD Your ...

...Santa Fe going 60 miles plus and then my car lost all rpm then shut off. Please help! is your main drive belt still in ...

chrysler 300c revs high rpms in drive but slowly moves along turn off then back on drives fine car wants to go into a lower gear sometimes than it should at low speed like 30mph and it wants to go ...