2002 Hyundai Santa Fe "change power steering pump" Questions

...change HI check your power steering oil pump reservoir filter screen this seats at the bottom of reservoir is probably plug .it can cause the pump to aerate if thats your case replace reservoir.for ...

...power steering fluid leaking and said i would have to replace power steering pump...which they haven't done yet..and the squeeling noise is back ..could that be from the power steering pump? The pump ...

power steering pump in noisy when first started when cold, 2004 santa fe 3.5, has 62000 miles Try flushing the fluid,which you should be doing every 3 years Add a bottle of Lubgard for power steering ...

Power steering fluid leaking It's either a power steering return line or a pressure line. You need to have it in the air to diagnose definitively but the rule of thumb is that if it's leaking and the ...

Power Steering Pump on 01 v6 santa fe steering gets heavy then loosens up and whines, thinking I'm gonna have to change the pump, any secrets as to where to start? Sure sounds like its low of fluid or

...hoses. cooler is clear and flows free. Still have a whine. if you are talking power steering system, the whine is a vibration in a problem control valve and could be in the steering valves on the ...

power steering until the engine speed is up and only slightly then. Tried bleeding by turning lock to lock 20 times with no change. Now I did not have the reservoir cap off when I did this, would that

Power steering fluid leaking profusly. mec changed pressure hose[it was rusted out} 02 santa fe. Problem is occuring again. need to bring it back to mec 26 miles away. Will it be safe to drive adding ...

...power steering pump on the Santa Fe 04, 3.5 w/5speed auto. YEP!... I have... IT'S A BUGGER-BEAR to replace. There's of course the 24mm bolt for the high pressure hose, then there's the ...

...change the cambelt Dual Mass Flywheel, and will also need new clutch Remove the engine coverUsing a [16 mm], rotate the tensioner arm clockwise (about 14° )and remove the belt from the pulley. ...