2002 Hyundai Santa Fe "back brakes" Questions

brake pedal hard on startup little or no brake put back into neutral and the pedal gose down and brakes come back Vaccum leak or bad brake booster.

...back up i would take it to a different place and have someone else do it cause it sounds like the mechanic that did your brakes is a ******. There is probably air in the brake system and the brakes ...

...paddle should go down a few inches, also check for vacum at power brake booster under hood ( sit in back of master cylindre ) if you have vacum there and brake paddle did not go dnow a few inches, ...

brakes get ur self a clamp to depress the brake cylinder back in.. jack up car.. remove tyre the brake should be held in with two double bolts a 17 and a 15 mm maybe.. loosen the botton one remove the

...today and the same thing happened. It seems I have only front brakes. There is no ABS brake light. Take the vehicle back to whatever service center/garage did the brake work and tell them to fix

...down. When your brakes are replaced new, the mechanic pushes your caliper pistons back in, to allow for the new and thicker brake pads, and the fluid level will go back up into the master

ABS seems to kick back on brake peddle at slow speeds Whenever Im slowing down in my santa fe (for example when im approaching traffic lights or a junction) the ABS seems to kick back on my brake ...

2005 Santa Fe back wheel lockup when in reverse ref: linkhttp://www.hyundai-forums.com/lc-2000-2005-accent/152405-tried-replace-rear-brake-shoes-drum-will-not-fit-after-new-shoes.html The automatic ...

...to change front brake pads Need to remove wheels, remove caliper (brake housing) (bolt is at the back of the disk brake-say use a socket wrench somewhat 21mm plus or minus). Maybe replace also the ...

Have replaced all 4 brakes and bled the lines in proper order but still have spongy brakes? any ideas? a leaking brake master cylinder will allow air back into the lines after a bleed.