2002 Hyundai Santa Fe "abs sensor" Questions

...ABS sensor or wire to the sensor up front check the wire that runs from the inner finder well and make sure it connected to the ABS sensor on the spindle I have the same model and year of vehicle, ...

...ABS You may have a wheel sensor or sensor ring damaged or defective at the one of the wheels, that will cause the ABS to think a wheel is locked up and give the problem you have. To disable the ABS ...

...Abs code is a c1274 g sensor fault. Doing a little research I found that it has to do with the traction control prime valve. What is the traction control prime valve. Is it part of the abs pump? And ...

...if the ABS control module see's this signal loose it thinks the wheel is locked up and activates the system, have the dealer check the ABS for codes that might lead them to the defective

abs sensor removal How do I remove the abs sensor on a 2002 fwd. Hyundai Santa Fe JUST LOOK IN THE HAND BOOK TO SEE WHICH FUSE YOU NEED TO TAKE OUT AND THAT WILL DO IT

...abs[will not set off code ] can also do brake studder without touching brake usually does it under 5 mph the problem is one of the sensors is dirty or has some corrosion on it ===chevy back in 2000 ...

...sensor for damage.by wheel doing tire spin could have damage the abs wheel speed sensor wires the abs wire could have a missing clip hold abs wheel sensor in place wires got close to tire got

have to pump the breaks to disengage. Any solution? Are there any malfunction lights coming on? If so then it could be a wheel speed sensor. sometimes people confuse rotor vibration with abs pulsation

Hyundai santa fe ABS working when not needed or ABS kicks on for no reason.there is no light on ABS-TCS. Pull all the ABS wheel speed sensors and clean off any metal or dirt you find attached to them

sensor? Also my abs and tcs lights keep going on and off. Sometimes my abs kicks on when I put on my brakes for no reason. The garage says it is the g sensor when they hooked it up to computer. Is all