Hyundai Motor 2000 Tiburon "transmission fails shift" Questions

...transmission it sounds like you have broken or lost a clip or mount that holds you shift cable in position. You need to follow the shift cable from the trans to the place where it mounts to the trans ...

...shift transmission. If so, your slave or master cylinder for your clutch has either failed or leaked out, or both. Try adding some brake fluid to your Clutch master cylinder and pump vigorously to ...

...are the general instructions on the start of diagnosing any electronically controlled engine or transmission problem. The engine and the automatic transmission (transmission control is only for ...

...transmission to shift erratically or get stuck in a gear. Transmission Control Module (TCM): The TCM is responsible for controlling the transmission's shifting and overall performance. If the TCM is ...

...transmission- Automatic. It will shift through all gears for about 3 miles and then it won't shift out of 1st. Any ideas? could be losing line pressure inside the transmission , or the pressure ...

...transmission not to shift. Is the Engine Malfunction Light on? A simple scan tool can read those. What Are the Symptoms of a Bad or Failing Camshaft Position Sensor? Check Engine Light Comes On. The ...

transmission 4T65E << the real name is this the box AT, FWD, 3.05 axle ratio (opt F83)???? so what makes any E box shift wrong well not using a scan tool first you fail. it will set codes DTC if

...Transmission shift solenoid, torque converter, and a speed sensor. The most likely culprit would be the the Transmission shift solenoid AKA Transmission control solenoid. The part itself will cost ...

Transmission don't shift in drive If the transmission will not move the car forward in Drive, check fluid level, fluid condition, transmission filter, and linkage adjustment. If the transmission will ...

as a faulty transmission, low transmission fluid, a broken shift cable, or a faulty shift solenoid. It is best to have the vehicle inspected by a qualified mechanic to determine the cause of the issue