2006 Hummer H3 "keys hard enter ignition switch" Questions

...hard work. The trick is you have to actually drive the vehicle before the TPM reset is finalized. The programmer needs to be drawn and quartered on this fine mistake. The manual should at least note ...

...hard to get it started, but your steering will still be locked without a key. You can unscrew the electrical section of the ignition switch off the mechanical section and turn it with a screwdriver, ...

hard to turn with key The easiest solution to try ... Get some silicon-based spray lubricant at your auto supply or WalMart (dont use graphite) and spray it into the lock. Sometimes foreign substances

...hard, but it is potentially dangerous. The cost of the new lock and key assembly is $150.00+. If you want to have the lock fit your exsisting key, then you will have to get the tumblers changed to ...

...keys. Does this sound like a tumble switch problem or could the problem be caused by the steering wheel locking mechanism? Is this something that a mechanically inclined individual should attempt or ...

...Enter service programming (F1). Press the "REQUEST INFO" key. Select "Reprogram Existing Module" Exit the vehicle and remove the Tech 2. Follow the existing procedure to reflash the body control ...

hard to pin down. Have the same car. Same problem. I had to replace the starter. Check for loose connection at the starter. If anything, take the starter off and have it checked. It is easy to get to.

...hard to get to. To see it you will have to loosen, pull, use a flashlight or a mirror but it can be done. 2002 thru 2007 is in the right panel behind the middle row window. It is below the seat belt ...

ignition switch power to starter. If you have checked that, then: This procedure usually works: ·Check the battery cable connections: Make sure the negative cable makes a good ground connection at the

hard to get in. Can I use the stuff used to unlock car doors in the ignition? the only way your key wouldn't work is if the tumbler is damaged. The de-icer you are speaking of is for ICED UP tumblers.