2001 Daewoo Lanos "clutch problems" Questions

...plate. If it does then you have gearbox problems  metal fatigue on clutch release lever was responsible slave cylinder was moving lever outside gearbox but was not moving release bearing on ...

have a problem no power when in gear from clutch slipping when i put it in gear and when i lift the clutch it engages and the car want go fast but the engine refs alot to get it moving Hi this sounds ...

have a 99 lanos-clutch have a 99 lanos-the car is manual transmission-possible clutch went out but then we got in after setting for a couple weeks and it went through all the gears and was fine until ...

Clutch sticking but works sometimes Sticky clutch not engaging This problem is indicative of a blocked compensating port in the clutch master cylinder not allow the fluid to return to the reservoir ...

...It doesn't grind, it feels like the trouble is in the gear shift, but I thought maybe it was the clutch. Is the clutch adjustable for my car? Do I need a new clutch? Either your clutch plate is ...

...dont grind but its very hard ti shift .its a 2000lanos. If this is a manual transmission ,then the clutch master,or the clutch slave is by-passing,and,or leaking and causing the problem,or the

daewoo problem with power from gears and clipping clutch I assume you mean the clutch is slipping I have heard that the pressure plates on this auto have been really sloppy and tend to slip after ...

...spluttering during rains or even when car is washed. Has the clutch been replaced recently? There is an earth wire under one of the bell housing bolts,if not refitted can cause all sorts of

...The more I drove, however, the harder it was to get into 1st and 2nd. I already have to push the clutch in clear to the floor to get it into 1st. Do I need a new clutch? Does my car have an ...

....However when the car is switch off it goes into gear no problem it is a manual. Sounds like the clutch is not disengaging properly. If the car grates when trying to select reverse this will be