1998 Lincoln Town Car "function switch wiring" Questions

...function switch (13K359). circuit wiring and circuit protection. Power is supplied to the lighting control module through instrument panel Fuse 6 (10A). This fuse is hot in START or RUN. The lighting ...

...function switch on the brake pedal lever to control functions like the brake lights and the cruise control, but Ford products are good at using two switches on the brake pedal lever. Be sure to check ...

...function switch. Damaged circuitry. GO to Pinpoint Test C . Windshield Wipers Inoperative at Interval Setting Windshield wiper motor . Damaged windshield wiper control module . Damaged multi-function ...

...Will it allow you to remove it from park when the pedal is depressed, ie is the brake interlock

...function properly thru all positions but if put back into park will lock there. What do I do to fix this? There is a switch mounted on the arm of the brake pedal (under a plastic cover held on with 3 ...

...into the headlamp switch. Probably a bad breaker. But you should check all headlamps for proper function(normal brightness) to eliminate possibility of wiring problem(no collision damage

...switch up, with the activator motor plug exposed, grab the plug and shake it. If you can get it to function and fail, on failure grab each wire with a needle nose plier, push and pull each wire ...

...wies have a tendency to break, This will cause no brake lights amd not allow the shift interlock to ...

...function" switch?.the black or chrome lever that operates the wipers and the turn signals?correct? That lever/switch is the most common failure for this problem that I have seen. If you have replaced ...

...Function switch bad? Is the Lighting Control Module bad? Is the Multi-Function switch bad? Your asking questions that can't be answered without doing electrical circuit testing . You could replace ...