...pully on the engine is comming off how big a job is it to fix? not to bad if u have the tools Don't let it go, or you'll be sorry, it will cause a lot of damage if it comes off, plus wobbling on ...
Question about Lincoln Mark VIII
...crankshaft pully is worn and my pully is wobbleing can i tack weld it That is not a pulley. that is the harmonic balancer and NO you cannot weld it. No. The harmonic balancer is a two piece press fit ...
Question about Lincoln Mark VIII
crankshaft pulley loose has the wobbles can see a fine metal dust on the outside of the pully if loose how do i tighten up Most likely the rubber part of the harmonic balancer has deteriorated causing
...crankshaft pulley wobbles and makes a weird noise on my 93 prizm lsi Hi there; Somethimes this happens over time. It is usualy caused by an oil leak at or above the pully causing the rubber in the ...
pully bearing is wobbling is that a problem? in my northstar engine the pulley is whats known as the Harmonic balancer and I would have it checked it reduces vibrations that come along with the firing
...crankshaft pully and then grasp the pully to see if it is loose in some way. To remove the large bolt(if that's what you have), will require the use of a strap wrench which can be gotten for the free ...
...pully wobbles It would be my best guess that the retaining bolt could be loose. If it is then you will want to make sure the crankshaft is not damaged, If the crank is ok, then tighten the bolt and ...
Question about Lincoln Mark VIII
...crankshaft pully and the tensioners, a big problem with Renault's is when the belt comes off bits of belt may go into the camshaft belt causing the engine to lose its timing and in some cases causing ...
...pully, except the crankshaft, should turn freely and have no wobble play at the bearings. If any components have a grinding feel to them when you turn the pulleys, it needs to be replaced. Good luck, ...
...pully and the the rest of the damper. check that and see if it is separated. if not looks like your crankshaft bearings could be bad I would suggest checking the bolts that attach the pulley to the ...
320 questions posted
Usually answered in minutes!
201 Questions
148 Questions
164 Questions
146 Questions
106 Questions