Hyundai Motor 2004 Sonata "replacing crankshaft position sensor" Questions

Ad

Question about Hyundai Sonata

1 Answer

crankshaft position sensor. It may be on the front of the engine, on the side or in the rear. A shop manual should be able to tell you where it is for your car's year, make and model. Disconnect the 3

Ad

Question about Hyundai Sonata

1 Answer

...crankshaft position sensor. The crankshaft position sensor is located next to the flywheel/torque converter. The computer is rarely the problem unless there was a short that caused undue current to ...

Ad

Question about Hyundai Sonata

1 Answer

...replacing the sensor. If you reply with your model and year, I will see if I can provide additional information. P0335 Crankshaft position (CKP) sensor - circuit malfunction Possible causes: Wiring, ...

...crankshaft sensor A Diagram of 2004 hyundai sonata crankshaft sensor A Exactly what needs to be removed first? I'm gonna plan on replacing the timing belt U uvicasion del crank shaft position ...

Question about Hyundai Sonata

2 Answers

...crankshaft position sensor on a 2005 hundai sonata? Some of these late 05 models have the sensor located on the bellhousing of the trans where the flywheel is located The sensor is right above the ...

Question about Hyundai Sonata

1 Answer

...Crankshaft Position Sensor wire harness. The 4 Cylinder is quite different. You not only change the timing belt, but also the countershaft (balance) belt, which is behind the crank position sensor ...

Question about Hyundai Sonata

2 Answers

...replacing this part we tried to start the car and all it does is crank...its not getting any spark what so ever so he said it might be the crankshaft position sensor- ignition misfire sensor...could ...

...diagnostic codes read p0320 on 2004 Hyundai sonata what needs to be replaced? P0320 =no signal detected from crankshaft position sensor during cranking, my guess is replace the CPS HYUNDAI P0320 ...

Question about Hyundai Sonata

1 Answer

...CRANKSHAFT POSITION SENSOR IN A 2005 HYUNDAI SONATA? The sensor should be mounted with 2 screws. The location should be between the airfilter box and the engine or the otherside of the engine where ...

...crankshaft position sensor. I'm told to change the crank position sensor first. How do I change the sensor?? The sensor is located on the left hand rear side of the block (near the bell housing). It ...

Not finding what you are looking for?
Hyundai Motor 2004 Sonata Logo

773 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...