Hyundai Motor 2004 Sonata "crank position sensor removal" Questions

...Crank Position Sensor connectors, etc.). When you get to this point on the V6, you also have to remove the front engine mounting bracket from the front of the engine (4 14mm bolts, also a 12mm bolt ...

crank shaft position sensor located hyundai sonta 2004 v6 I like to know where the crank shaft postion sensor is located on a hyundai sonta 2004 v6 ,,,,,,An if you can send a picture on where it is ? ...

...crankshaft sensor A Diagram of 2004 hyundai sonata crankshaft sensor A Exactly what needs to be removed first? I'm gonna plan on replacing the timing belt U uvicasion del crank shaft position ...

...crank shaft position sensor is held on by a couple of bolts and its near the crank and should have a wire coming out from it as well as a quick disconnect plug in lines for removal.. You should not ...

...crank angle sensor was bad. I replaced it and the check engine light remains on and upon cleaing it the check engine light came back on with the code indication the crank angle sensor wasn't working. ...

...crank position sensor? If so, on the four (4) cylinder, it's located behind the timing belt cover at the crankshaft.. if it's the 2.5 V6, it's located behind the LH exhaust manifold on the engine ...

...crank position sensor you are looking for. For more detailed instructions go to www.hmaservice.com and register for free to get access to all the info and schematics they have at the dealerships for ...

...they replace the crankshaft position sensor? thanks g68mike , they tested that sensor found it be correct.car also has misfiring(backfiring) at lower speeds not sure both these problems are

...crank sensor. It is attached to the bottom side of the engine on the driver's side on your Sonata. It will also be the only plug-looking device, with three wires running from it. Remove the mounting ...

...position sensor) With the engine in non-running condition connect your A/C voltmeter to the pair of wires at the pulse generator and crank the engine. You are looking for an A/C signal that makes 4-6 ...