2004 Hyundai Santa Fe "remove front bumper plastic 2001" Questions

...front bumper there is a nickel size Philips head plastic screw. Remove it then remove the radiator cap. Made a video showing how to replace the radiator on my 2005 Hyundai Santa Fe and in the process ...

remove the front facia (bumper to get access to the fog lamp assemblies as they are bolted in from behind. No big deal. There are a few screws along the top of the facia under the hood along with some

remove(and then replace) the front bumper so I can install a grill/brush guard? Plastic rivets in the wheel wells, clips under the headlights, remove the grill, plastic clips under the front, too much

...front bumper has to be removed first the fog lights are held in place behind the bumper........ but..if you just want to replace a duff bulb.......that can be done by removing the wheel...then the ...

...remove the headlamp assembly on a 2001 VW Cabrio convertible The front grill and bumper has to be removed to reveal the 2 lower screws holding each lamp assembly. Removal of the hood latch is simple, ...

front bumper of a 2003 mitsubishi eclipse gs you need to remove the headlights there is a pin on the bottom besides the bolts, along the top of the cover is your air cleaner intake remove the two pins

How do I take out Renault Laguna 2001 front headlight on driver's side? Need to replace full front headlight on right hand side its easier to remove plastic off front bumper to get to bottom bolts

...between front bumper and front wheel. If there is no panel, then go to this web ...

...cooling fan relay or control module is located under the front bumper on the passenger side usally have to remove front bumper or remove passenger headlamp and drill black plastic with a 2" hole ...

...front of the sides of the wing right at the point where it connects to the wheel arch. remove these (one on each side) and the bumper will slide backwards and off the body. Voila. Piece of cake. ...